SMARTci™ 1 in 1
System

GreenGirt® composite metal hybrid (CMH™) sub-framing joins the building cladding and insulation to a building structure. It’s an insulated composite sub-framing component inside the SMARTci™ assembly. GreenGirt® CMH™ is revolutionary in the way it eliminates the problem of thermal bridging and it boasts the highest thermal-efficiency rating in the industry between 92%-98%. GreenGirt® CMH™ is a recyclable building life product that will help with LEED certification.

Download Specifications

View Full Technical Library

https://i0.wp.com/greengirt.com/wp-content/uploads/2018/10/1in1RenderMid-e1665594599174.jpg?fit=536%2C536&ssl=1

SMARTci™ 1 in 1 System
Configuration Options

–	GreenGirt® / SMARTci™ 1 in 1 System
Insulation Type	Mineral wool, spray foam
System includes	Girt
Substrates	All*
GreenGirt® Sizes	1.5″, 2″, 2.5″, 3″, 3.5″, 4″, 4.5″, 5″, 5.5″, 6″, 8″
Insulation Thickness	1″ – 8″
GreenGirt® Orient	Horizontal/Vertical
Secondary Framing	Metal girt Cladding rails
Types of Cladding	All**
Drainage Plane Location	Behind the SMARTci Insulation

System Components

3 Basic Pieces to the System
33 Specific Engineered Qualities
Zero Thermal Short Fasteners
Universal Cladding Attachments
Cost Effective
Open and Closed Framing Application
Zero Cold Spots for Condensation
Fewer Parts for Quick Installation
Installed Over Multiple Surfaces
The SMARTci System of products have tested and approved ASTM E84 Class A ratings, UL94 V0 and is compliant with NFPA 285 requirements.

How It Works

GreenGirt® CMH™ is a composite metal hybrid sub-framing system to house the CI (continuous insulation) specified and provide a universal cladding attachment support – ensuring zero thermal bridging. It can be used on any substrate or cladding, and can be installed horizontally, vertically or diagonally.

GreenGirt’s design features innovative ‘splines’ that provide multiple solutions. These splines act as sub-furring to house any insulation, as well as a universal attachment design for virtually any cladding.

GreenGirt’s design features innovative and dynamic multiple attachment solutions, along with thermal efficiencies of 92%-98%. It yields the highest R-Values with the lowest amounts of insulation of any system on the market. It has been tested and approved for ASTM E84 Class A, UL94 V0, and is NFPA 285 compliant.

System Benefits

ASHRAE 90.1 Zone specific barrier location • ASHRAE 160 specific design – passes and exceeds zone specific requirements
3 basic pieces to the GreenGirt – Simple Z
Insulated structural composite material – specifically engineered for thermal and structural properties
Structural wind resistance greater than 40 pounds per square foot is possible
Retains the insulation in the field – no fasteners, no blow offs
Anti-siphon groove – eliminates water migration into seam/ both sides
Steel fastener retention strip – utilizes industry standard fasteners that tie into adjacent attachment members to create cantilevered compatibility with integrated exterior metal fastening grid that is thermally isolated and increase performance by distributing the loading throughout the composite section
Force distribution zones FEA designed for optimal strength (radii & variable thickness)
Can be used on multiple substrates
Can be used with virtually any insulation and thicknesses
Universal attachments design for any cladding type
Proven and thoroughly tested (400+ tests and simulations)
True Single Pass Insulation system